Panasonic HD1700pe Operating Instructions Manual Download

Page: 69 / 134

<CARD>

SHIFT

Memory name

Memory selection
cursor

Warning message 1

SHIFT

Warning message 2

File status (VTR)

File number
(VTR)

File number
(CARD)

File title (CARD)

File title (VTR)

File status (CARD)

SHIFT

SYSTEM MENU/SETUP MENU/50PIN ASSIGN

File status

[MENU/ERROR LOG/MULTI CUE]

The settings and information can be saved onto or
loaded from the IC card memory. When

(CARD)

is pressed on the <MENU> screen while the

button

is held down, the function menu shown below is
displayed.

MULTI CUE

ERROR LOG

Warning message 1

Warnings concerning the IC card are displayed here.

NO CARD

The IC card has not been inserted.

UNFORMATTED CARD

The IC card is not formatted.

HD150 FORMAT!

This card was formatted by the AJ-HD150.

HD1500 FORMAT!

This card was formatted by the AJ-HD1500.

Warning message 2

BATTERY!

This appears when the battery inside the IC card has
no charge left. It signifies that it is time to replace the
battery.

PROTECT!

The IC card protection is set to ON.

File status (CARD)

File status (VTR)

No storage files are present.

- - - - -

Blank

Storage files are present.
(Unlocked status)

The target file is in the
unlocked status.

≤

Storage files are present.
(Locked status)

The target file is in the
locked status.

Function menus

<Notes>

• IC cards are not compatible with other VTR models.
• The IC cards which can be used are the 68-pin two-

piece type of SRAM cards (64KB or more) with
replaceable battery. Model number BN-064HSR is
recommended.

CARD

Summary of Contents for HD1700pe







































































































































Search results

Summary of Contents for HD1700pe

Reviews:

Related manuals for HD1700pe

Brands by name

Popular brands

Panasonic HD1700pe, Operating Instructions Manual

Search results

Summary of Contents for HD1700pe

Reviews:

Related manuals for HD1700pe

Brands by name

Popular brands