104
Setup menus
The underlining (__) denotes the factory setting mode.
<MENU>
No./Item
Description of setting
A02
P. ON LOAD
This VTR is equipped with VTR MEMORY
for storing the current settings (*
1
) and VTR
MEMORY
to
for backing up VTR
MEMORY
. The data of a selected VTR
MEMORY
to
can be loaded into VTR
MEMORY
and operation started on the
basis of this data when the power is turned
on.
0000
OFF:
Operation is started using the previous
settings.
0001
USER1:
The VTR MEMORY
data is loaded and
operation started on the basis of this data.
0002
USER2:
The VTR MEMORY
data is loaded and
operation started on the basis of this data.
0003
USER3:
The VTR MEMORY
data is loaded and
operation started on the basis of this data.
0004
USER4:
The VTR MEMORY
data is loaded and
operation started on the basis of this data.
4
3
2
1
C
4
1
C
4
1
C
*1: The term “settings” here denotes all the settings of the setup
menus, what is registered in the PF1/PF2 menus, and the
contents of some of the function buttons.
<Connections with Dolby-E* components>
When the VTR is to be connected to a Dolby-E encoder/decoder for recording or playing back Dolby-E data, set
the audio input and output levels to UNITY, and select the following setup menu item settings.
<Notes>
• Dolby-E data cannot be recorded or played back in
the 60 Hz mode.
• Adjust the timing with the video signals to cover the
time taken by the Dolby-E component for
encoding/decoding outside the VTR.
• Set the bit depth of the Dolby-E encoder/decoder to
16 bits.
• Noise will be output from the ANALOG AUDIO OUT
connectors of the channels through which the
Dolby-E data is passing.
• The audio level meter will deflect beyond the range
of its markings for those channels through which
the Dolby-E data is passing.
• Noise will be output when a tape on which Dolby-E
data has been recorded is played back in the JOG
or VAR mode.
* Dolby and the Double D symbol
Î
are trademarks of
Dolby Laboratories Licensing Corporation.
No.303 AUD EDIT IN = CUT
No.304 AUD EDIT OUT = CUT
No.725 REC CH1 = CH1
No.726 REC CH2 = CH2
No.727 REC CH3 = CH3
No.728 REC CH4 = CH4
No.729 REC CH5 = CH5
No.730 REC CH6 = CH6
No.731 REC CH7 = CH7
No.732 REC CH8 = CH8
No.734 PB FADE = CUT
No.758 JOG PROC = OFF
No.762 AUD RATE CON = OFF
Summary of Contents for HD1700pe
Page 133: ...133 ...
