Preparations before recording
DVQX2253 (ENG)
20
Attaching and removing the battery
1
Install the battery by inserting
it in the direction shown in the
figure.
0
Insert the battery until it clicks and locks.
Removing the battery
Make sure that the power switch is set to <
OFF
>
and the status indicator is turned off, and then
remove by holding onto it taking care not to drop.
(
l
21)
0
While pressing the battery release button (A),
remove the battery.
0
Do not use any other AC adaptors except the supplied one.
0
We recommend using Panasonic batteries (
l
18).
0
If you use other batteries, we cannot guarantee the quality of this product.
0
Do not heat or expose to flame.
0
Do not leave the battery(ies) in a car exposed to direct sunlight for a long period
of time with doors and windows closed.
0
Do not expose to low air pressure at high altitudes.
0
Do not expose to extremely low air pressure, as this may result in explosions or
leakage of flammable liquids and gases.
0
The battery charger will determine the status of the battery after the battery is
mounted. Therefore, it may take some time until the charging lamp is to
illuminate. Mount the battery again if the charging lamp does not illuminate after
ten seconds or longer has elapsed.
0
Mount the battery to be charged prioritized on the <CHARGE1> side when
charging.
(A)
HC-X20_X2PP-DVQX2253_eng.book 20 ページ ２０２２年７月２１日 木曜日 午前１１時４４分
