14
SQT1160 (ENG)
Inserting/removing an SD card
When using an SD card not from Panasonic, or one previously used on other equipment, for the first
time on this unit, format the SD card. (
l
26) When the SD card is formatted, all of the recorded data
is deleted. Once the data is deleted, it cannot be restored.
Caution:
Check that the access lamp has gone off.
series/
series
Access lamp [ACCESS]
A
≥
When this unit is accessing the SD card or built-in memory, the access lamp lights up.
1
Open the SD card cover and insert (remove) the SD card into (from) the
card slot
B
.
≥
Face the label side
C
in the direction shown in the illustration and press it straight in as far as
it will go.
≥
Press the centre of the SD card and then pull it straight out.
2
Securely close the SD card cover.
≥
Securely close it until it clicks.
WXF990
VXF990
VX980
Simplified-HC-WXF990&VXF990&VX980_GC&GW&GN&GH-SQT1160_mst.book 14 ページ 2016年1月14日 木曜日 午後3時2