Panasonic HC-W580 Basic Owner'S Manual Download

Page: 59 / 281

- 15 -

∫

About the Speed Class ratings for recording motion pictures

Depending on [REC MODE] (

) and [REC FORMAT] (

), the required card differs.

Use a card that meets the following ratings of the SD Speed Class. Use of a non-compatible
card may cause recording to stop suddenly.

≥

SD Speed Class is the speed standards regarding continuous writing. To check the class, see the
labeled side, etc. of the card.

≥

When recording with [Backup for Twin Camera] (

) set to [ON], use an SD card

conforming to Class 10 of the SD Speed Class Rating. If the SD Speed Class Rating is
lower than Class 10, recording may suddenly stop.

Inserting/removing an SD card

Caution:
Check that the access lamp has gone off.

Open the SD card cover and insert (remove) the SD card into (from) the card
slot

≥

Face the terminal side

in the direction shown in the illustration and press it straight in as far as

it will go.

≥

Press the center of the SD card and then pull it straight out.

Securely close the SD card cover.

≥

Securely close it until it clicks.

Recording formats

Recording modes

Speed Class ratings

Label examples

MP4/iFrame

[1080/50M]

Class10

[1080/28M], [720],

[iFrame]

Class4 or more

AVCHD

All

When using an SD card not from Panasonic, or one previously used on other equipment, for the
first time on this unit, format the SD card. (

) When the SD card is formatted, all of the

recorded data is deleted. Once the data is deleted, it cannot be restored.

Access lamp
[ACCESS]

≥

When this unit is accessing
the SD card, the access
lamp lights up.







Summary of Contents for HC-W580


























































































































































































































































































Search results

Summary of Contents for HC-W580

Reviews:

Related manuals for HC-W580

Brands by name

Popular brands

Panasonic HC-W580, Basic Owner'S Manual

Search results

Summary of Contents for HC-W580

Reviews:

Related manuals for HC-W580

Brands by name

Popular brands