background image

- 201 -

Before Installing HD Writer LE 3.1

Your installation or use of the Software defined below shall be conclusively deemed to constitute 
your acceptance of the terms of this Agreement. If you do not accept the terms of this Agreement, 
do not install, nor use the Software.

End User License Agreement

You (“Licensee”) are granted a license for the 
Software defined in this End User License 
Agreement (“Agreement”) on condition that you 
agree to the terms and conditions of this 
Agreement.
The following terms contain material 
representations regarding the disclaimers of 
Panasonic Corporation. Be sure to read 
through, understand and confirm the following 
terms.

Article 1 License
Licensee is granted the right to use the 
Software (the “Software” means the software 
and other information such as manuals 
downloaded by Licensee through Panasonic 
website), but all applicable rights to patents, 
copyrights, trademarks and trade secrets in the 
Software are not transferred to Licensee.

Article 2 Use by a Third Party
Licensee may not use, copy, modify, transfer, 
rent, lease, lend or allow any third party, 
whether free of charge or not, to use, copy or 
modify the Software, except as expressly 
provided for in this Agreement.

Article 3 Restrictions on Copying the Software
Licensee may make a single copy of the 
Software in whole or a part solely for back-up 
purpose.

Article 4 Computer
Licensee may use the Software only on one 
computer, and may not use it on more than one 
computer. Further, Licensee may not use the 
Software for commercial software hosting 
services.

Article 5 Reverse Engineering, Decompiling or 
Disassembly
Licensee may not reverse engineer, decompile, 
or disassemble the Software, except to the 
extent either of them is permitted under law or 
regulation of the country where Licensee 
resides. Panasonic, or its distributors will not be 
responsible for any defects in the Software or 
damage to Licensee caused by Licensee’s 
reverse engineering, decompiling, or 
disassembly of the Software.

Article 6 Indemnification
The Software is provided “AS-IS” without 
warranty of any kind, either expressed or 
implied, including, but not limited to, warranties 
of non-infringement, merchantability and/or 
fitness for a particular purpose. Further, 
Panasonic does not warrant that the operation 
of the Software will be uninterrupted or error 
free. Panasonic or any of its distributors will not 
be liable for any damage suffered by Licensee 
arising from or in connection with Licensee’s 
use of the Software.

Article 7 Export Control
Licensee agrees not to export or re-export to 
any country the Software in any form without 
the appropriate export licenses under 
regulations of the country where Licensee 
resides, if necessary.

Article 8 Termination of License
The right granted to Licensee hereunder will be 
automatically terminated if Licensee 
contravenes any of the terms and conditions of 
this Agreement. In this event, Licensee must 
destroy the Software and related 
documentation together with all the copies 
thereof at Licensee’s own expense.

Summary of Contents for HC-W580


























































































































































































































































































Reviews: