- 66 -
When you start recording, the image/audio gradually
appears. (Fade in)
When you pause recording, the image/audio gradually
disappears. (Fade out)
≥
The Fade setting is cancelled when the recording stops.
∫
To select the colour for fade in/out
≥
The thumbnails of scenes recorded using fade in become black (or white).
This brightens parts that are in shadow and difficult to see and suppresses white saturation
in bright parts at the same time. Both bright and dark parts can be recorded clearly.
≥
If there are extremely dark or bright parts or the brightness is insufficient, the effect may not be
clear.
This allows recording of the pictures and sound to start approximately 3 seconds before the
recording start/stop button is pressed.
≥
appears on the screen.
≥
Aim the unit at the subject beforehand.
≥
There is no beep sound.
≥
PRE-REC is cancelled in the following cases.
j
Press the recording/playback button
j
Touch the recording mode switching icon
j
If you remove the SD card
j
If you touch
j
If you press the Wi-Fi button
j
If you turn the unit off
j
If you start recording
j
After 3 hours have passed
≥
After setting PRE-REC, if recording starts in less than 3 seconds, motion pictures taken
3 seconds before pressing the recording start/stop button cannot be recorded.
≥
Images displayed on the thumbnail in Playback Mode will differ from the motion pictures
displayed at the start of playback.
Fade
: [RECORD SETUP]
#
[FADE COLOUR]
#
[WHITE] or [BLACK]
Intelligent Contrast Control
PRE-REC
This prevents you from missing a shot.
(Fade in)
(Fade out)
MENU
PRE-REC
MENU