Panasonic HC-V520K Owner'S Manual Download

Page: 14 / 188

- 14 -

Inserting/removing an SD card

Caution:
Check that the access lamp has gone off.

Open the SD card cover and insert (remove) the SD card into (from) the card
slot

≥

Face the terminal side

in the direction shown in the illustration and press it straight in as far as

it will go.

≥

Press the center of the SD card and then pull it straight out.

Securely close the SD card cover.

≥

Securely close it until it clicks.

≥

Do not touch the terminals on the back of the
SD card.

≥

Do not apply strong shocks, bend, or drop the
SD card.

≥

Electrical noise, static electricity or the failure
of this unit or the SD card may damage or
erase the data stored on the SD card.

≥

When the card access lamp is lit, do not:

Remove the SD card

Turn the unit off

Insert and remove the USB cable

Expose the unit to vibrations or shock

Performing the above while the lamp is on
may result in damage to data/SD card or this
unit.

≥

Do not expose the terminals of the SD card to
water, dirt or dust.

≥

Do not place SD cards in the following areas:

In direct sunlight

In very dusty or humid areas

Near a heater

Locations susceptible to significant
difference in temperature (condensation
can occur.)

Where static electricity or electromagnetic
waves occur

≥

To protect SD cards, return them to their
cases when you are not using them.

≥

About disposing of or giving away the SD
card. (

182

)

When using an SD card not from Panasonic, or one previously used on other equipment, for the
first time on this unit, format the SD card. (

) When the SD card is formatted, all of the

recorded data is deleted. Once the data is deleted, it cannot be restored.

Access lamp [ACCESS]

≥

When this unit is accessing the
SD card or built-in memory, the
access lamp lights up.







Summary of Contents for HC-V520K





























































































































































































Search results

Summary of Contents for HC-V520K

Reviews:

Related manuals for HC-V520K

Brands by name

Popular brands

Panasonic HC-V520K, Owner'S Manual

Search results

Summary of Contents for HC-V520K

Reviews:

Related manuals for HC-V520K

Brands by name

Popular brands