38
VQT3W38
2
Close the LCD monitor.
The status indicator
A
flashes green and the unit goes into
Quick Start standby mode.
≥
The lens cover does not close.
3
Open the LCD monitor.
The status indicator
A
lights red and the unit is put
into recording pause.
≥
Quick Start Standby Mode is cancelled if
j
about 5 minutes elapsed
j
mode is set to
≥
Depending on the recording conditions and menu settings, time for Quick Start may be
longer than 0.6 seconds.
≥
It may take some time for Automatic White Balance to adjust.
≥
In the Quick Start Mode, the zoom magnification becomes approx. 1
k
.
≥
When it has gone into Quick Start Standby Mode automatically with the [ECONOMY
(BATT)] (
l
37)/[ECONOMY (AC)] (
l
37), close the LCD monitor once and open it again.
≥
Turn the unit off using the power button.
Touch screen operation, starting and stopping of recording and unit on/off can be confirmed
with this sound.
2 Beeps for 4 times
When an error occurs. Check the sentence displayed on the screen. (
l
127)
You can change the operation icons to display in the Touch Menu.
Register 3 favourite operation icons.
≥
The default settings are,
(Fade),
(PRE-REC) and
(Video light) for Motion
Picture Recording Mode, and
(Photo light),
(Self-timer) and
(Backlight
Compensation) for Still Picture Recording Mode.
1
Touch [SELECT OPERATION ICONS].
2
Touch the operation icon you would like to change to cancell the setting.
3
Touch the operation icon to be set.
≥
Name of the function is displayed by touching and holding on the operation icon.
≥
To cancel, touch the operation icon again.
4
Touch [ENTER].
≥
For details about the function of each operation icon, refer to page 49.
[ALERT SOUND]
/
/[OFF]
(Volume low)/
(Volume high)
[SELECT OPERATION
ICONS]
HC-V500&V500M-EB-VQT3W38_mst.book 38 ページ ２０１２年１月１３日 金曜日 午後９時４分
