Panasonic HC-V270, Operating Instructions Manual

Page: 131 / 195

- 131 -
By setting up a Wi-Fi communication between this unit and a PC, you can copy scenes and still
pictures recorded with this unit to the PC.
A
PC
Preparations before using [Copy]
1 Check if the wireless access point is compatible with IEEE802.11b/g/n.
2 Check if the PC and the wireless access point are connected via Wi-Fi.
≥ You can also use a LAN cable to connect the PC and the wireless access point.
3 Set up a Wi-Fi connection between this unit and the wireless access point.
≥
[Easy Connection (WPS)] ( l 145 )
≥ Searching for wireless access points to set up a connection ( l 146 )
≥
Setting up a connection manually ( l 147 )
When the Wi-Fi connection is complete, proceed to “Copying to a PC”. ( l 133 )
≥
Using [Wi-Fi Easy Setup], you can also set up a Wi-Fi connection in conjunction with the
smartphone application “Image App”. (
l 143 )
Wi-Fi [V270]
[Copy]
≥ For information on the connection between a PC and a wireless access point, refer to
the operating instruction of the device in use.
≥ If this unit and a PC are not connected to the same wireless access point, copying is
not possible.
