42
VQT3Y04
When about 30 minutes have passed without any operation while connecting the AC adaptor
with this unit, the unit automatically turns off.
≥
This unit will not automatically turn off even if the [ECONOMY (AC)] is set to [ON] in
following cases:
j
Using the USB cable for PC etc.
j
PRE-REC is used
j
During playback of the slide show
This unit is put into recording pause approx. 0.6 seconds after the LCD monitor is reopened.
≥
When in Quick Start Standby Mode about 40% of the power used in Recording pause
mode is being consumed, so the recording time will be reduced.
≥
Quick Start will not work if there is no SD card inserted.
≥
Quick Start will not work if the [SD CARD] is selected in the [MEDIA SELECT], even if there
is no SD card inserted.
≥
Change the mode to
.
1
Set [QUICK START] to [ON].
2
Close the LCD monitor.
The status indicator
A
flashes green and the unit
goes into Quick Start Standby Mode.
3
Open the LCD monitor.
The status indicator
A
lights red and the unit is put
into recording pause.
≥
Quick Start Standby Mode is canceled if
j
about 5 minutes have elapsed
j
mode is set to
≥
It may take some time for Automatic White Balance to adjust.
≥
In the Quick Start Mode, the zoom magnification becomes approx. 1
k
.
≥
When it has gone into Quick Start Standby Mode automatically with the [ECONOMY
(BATT)] (
l
41)/[ECONOMY (AC)], close the LCD monitor once and open it again.
≥
Turn the unit off using the power button.
[ECONOMY (AC)]
[ON]/[OFF]
[QUICK START]
[ON]/[OFF]
HC-V100&V100MP_PC_PU_VQT3Y04_mst.book 42 ページ ２０１２年１月５日 木曜日 午前１０時２０分
