file:///C|/U
...al/Temp/Rar$EXa0.559/viewing/SGML_VIEW_DATA/ALL/HC-PV100GC/SVC/VM1609006CE/doc/VM1609006CE_06.xml[11/12/2018 2:43:01 PM]
6 Service Mode
Indication method of the service menu
1. Set the Power switch to ON, and turn to ON.
2. While pressing the “MENU”button to “FOCUS ASSIST”button and “Zoom lever” (or “Sub zoom lever”) to W side for more than 3 seconds
until the top screen of the Service Mode Menu being displayed.
Service mode menu
Screen
display
Contents
Function
1
Factory settings
Function to throw a product up in a factory shipment state.
2
Model/Destination
Settings
Change the model/destination.
(Selectable models and destinations are displayed.)
4
Lock Search and
error History
Indication
Display the camera system error code for three histories saved in
EEPROM.
5
Power ON Self
Check Result
Display
Power ON self check (function to diagnose correct function of the device
and interface between devices) result display.
14
Adjutment function
for the Service
The service adjustment do setup and adjustment of the following items
required in the feld service.
15
Restore the backed
up adjustment data
Restore the adjustment data to new or repaired Main P.C.B. from SD card
that the data backed up from original Main P.C.B. before repairs or
replacement.
16
Touch panel
calibration
Calibrate the touch positions of the touch panel.
NOTE:
Do not using service mode except above table of Service mode menu.
