19
SQT1407
2
Attach an external microphone
(optional) to the microphone
holder, and tighten the
microphone holder screw.
3
Connect the external
microphone to the AUDIO
INPUT1 terminal (XLR 3 pin).
≥
When wiring the microphone cable, use
the cable clamper of this unit.
≥
Keep the microphone holder screw and
INPUT terminal cap out of reach of
children to prevent swallowing.
∫
Attaching the INPUT terminal cap
Attach the INPUT terminal cap while the AUDIO INPUT1, 2 terminals (XLR 3 pin) are not used.
∫
Attaching/removing the filters for the built-in LED light
It is possible to attach the supplied diffusion filter or color conversion filter.
≥
Push in until a clicking sound is heard.
≥
Hold both the left and right sides of the filter to remove it.
≥
For information on the effects of the filters, refer to the “Operating Instructions” (PDF format).
D
AUDIO INPUT1 terminal (XLR 3 pin)
E
Microphone cable clamper
F
Microphone holder screw
G
External microphone (optional)
A
INPUT terminal cap
(How to attach/detach the filter)
HC-PV100GCGW-SQT1407_mst.book 19 ページ ２０１６年７月１２日 火曜日 午前１１時１７分
