Panasonic HC-MDH2GC, Service Manual

Page: 21 / 171

6 Service Mode
Indication method of the service menu
1. Set the mode switch “Motion Picture Recording” mode.
2. Set the power switch to ON, and turn to ON.
3. Keep pressing the “iA/MANUAL/FOCUS” switch to “FOCUS” side, “MENU” button and “Zoom Lever” (or
“Sub Zoom Lever”)
to W side for more than 3 seconds until the top screen of the Service Mode Menu being displayed.
Service mode menu
NOTE:
Do not using service mode except above table of Service mode menu.
4. End method of the top screen of the service mode menu
Touch the [ EXIT ] of LCD to end the service mode, and then POWER OFF.
6.1 Model/Destination Settings
Touch the [ 2 ] of LCD, select model/destination.
Operation specifications
Screen
display
Contents Function
1 Factory settings Function to throw a product up in a factory shipment state.
(When recorded data in Built-in memory, “error display” is done.)
2 Model/Destination
settings
Change the Model/Destination.
(Selectable models and destinations are displayed.)
4 Lock search history
indication
Display the camera system error cord for three histories saved in
EEPROM.
5 Power ON self check
result display
Power ON self check (function to diagnose correct function of the
device and interface between devices) result display.
14 Adjutment function for the
service
The service adjustment do setup and adjustment of the following
items required in the field service.
15 Restore the backed up
adjustment data
Restore the adjustment data to new or repaired Main P.C.B. from SD
card that the data backed up from original Main P.C.B. before repairs
or replacement.
16 Touch panel calibration Calibrate the touch positions of the touch panel.
Page 1 of 5
5/31/2017 file://C:\Users\sh.dehghani\Desktop\HC-MDH2GCALLSVC_VM1310012CE (1)\view...