background image

2

Safety precautions

 indicates safety information.

CAUTION

RISK OF ELECTRIC SHOCK

 DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, 

DO NOT REMOVE COVER (OR BACK).

NO USER SERVICEABLE PARTS INSIDE.

REFER TO SERVICING TO QUALIFIED SERVICE PERSONNEL.

The lightning flash with arrowhead symbol, 
within an equilateral triangle, is intended to 
alert the user to the presence of uninsulated 
“dangerous voltage” within the product’s 
enclosure that may be of sufficient magnitude 
to constitute a risk of electric shock to persons.

The exclamation point within an equilateral 
triangle is intended to alert the user to the  
presence of important operating and 
maintenance (service) instructions in the 
literature accompanying the appliance.

CAN ICES-3(A)/NMB-3(A)

For CANADA

CAUTION:

In order to maintain adequate ventilation, do not 
install or place this unit in a bookcase, built-in 
cabinet or any other confined space. To prevent 
risk of electric shock or fire hazard due to 
overheating, ensure that curtains and any other 
materials do not obstruct the ventilation.

CAUTION:

Before attempting to connect or operate this product, 
please read the label on the bottom.

The model number and serial number of this product 
may be found on the surface of the unit.
You should note the model number and serial number 
of this unit in the space provided and retain this 
book as a permanent record of your purchase to aid 
identification in the event of theft.
Model No.                                                                   
Serial No.                                                                   

For U.S.A.

For use only with power supply Panasonic, PNLV6506.

  DO NOT REMOVE PANEL COVERS BY 

UNSCREWING.

  

To reduce the risk of electric shock, do not remove  
the covers. No user serviceable parts inside.

  Refer servicing to qualified service personnel.

This is a class A product. In a domestic environment 
this product may cause radio interference in which 
case the user may be required to take adequate 
measures.

FCC Note:

This equipment has been tested and found to comply 
with the limits for a class A digital device, pursuant to 
Part 15 of the FCC Rules.  These limits are designed 
to provide reasonable protection against harmful 
interference when the equipment is operated in a 
commercial environment.  This equipment generates, 
uses, and can radiate radio frequency energy, and if  
not installed and used in accordance with the 
instruction manual, may cause harmful interference 
to radio communications.  Operation of this equipment 
in a residential area is likely to cause harmful  
interference in which case the user will be required to 
correct the interference at his own expense.

FCC Caution:

To assure continued compliance, (example -use 
only shielded interface cables when connecting to 
computer or peripheral devices). Any changes or 
modifications not expressly approved by the party 
responsible for compliance could void the user's 
authority to operate this equipment.

For U.S.A.

WARNING:

•  To reduce the risk of fire or electric shock, do not 

expose this apparatus to rain or moisture.

•  The apparatus shall not be exposed to dripping 

or splashing and that no objects filled with 
liquids, such as vases, shall be placed on the 
apparatus.

•  The mains plug or an appliance coupler shall 

remain readily operable.

Summary of Contents for GP-VD131



























Reviews: