Panasonic GP-US932CU, Operating Instructions Manual

Page: 14 / 32

x
Turn a C-mount lens clockwise to engage the lens with
the lens mount section.
■
How to mount lens
Important:
• Be sure to turn off the power of the CCU before mounting a lens.
• A lens whose projection length of the lens mount section is 4 mm or less shall
be used.
• The recommended lens aperture ranges from F2.2 to F16. Selection of less
than F2.2 of the lens aperture may result in image blurring.
• When a zoom lens is used, focus adjustment method varies with the lens. For
further information, refer to the operating instructions for the lens.
• When the lens is removed, be sure to put the cap on the lens mount section of
the camera head.
z
Remove the lens cap from the lens mount section of the
camera head.
14
C-mount:
less than 4 mm {5/32"}
Important:
• Check to see whether the surface of the optical filter is
clean before mounting a lens. If the surface is dirty, use
a blower brush for general camera to remove dust.
Recommended lenses
(as of October 2007)
Manufacturer Model Model number
FUJINON High Definition Fixed Lens HAF4.8DA-1
FUJINON High Definition Zoom Lens HA4x7.5DA-1
FUJINON 3CCD Camera Lens TF2.8DA-8
FUJINON 3CCD Camera Lens TF4DA-8
FUJINON 3CCD Camera Lens TF8DA-8
FUJINON 3CCD Camera Lens TF15DA-8