** ELC CONT **
AREA ALL
PEAK/AVE P....I....A
RET END
ON
OFF
ELC
-13-
1. Move the cursor to the FLM/FRM parameter.
2. Select FLM (field) or FRM (frame).
Note:
When FRM is selected, ELC is set to OFF auto-
matically.
3. Electronic Light Control Setting
(ELC)
The electronic light control function eliminates inter-
ference by strong background lighting which
makes the camera picture dark, such as a spot-
light. In the ELC mode, more photometric weight is
given to the desired point of the screen (where the
important object is located).
3-1. ELC detection control area setting (ELC CONT)
1. Set the ELC ON/OFF selector on the front panel of
the camera control unit to the ON position. Then
confirm that the ELC parameter is ON.
2. Move the cursor to the ELC parameter and press
the PAGE button.
The ELC CONT menu appears.
3. Move the cursor to the AREA parameter and select
the desired detection area. You can select the
detection area as follows:
ALL:
All areas on the monitor screen are detected.
MANU:
Detection areas are selectable manually.
See below for details.
CENTER:
The photometric weight is given to the
centre of the monitor screen.
S CIRCLE (Small Circle):
The photometric weight
is given to the area within a small circle in the
centre of the monitor screen.
M CIRCLE (Medium Circle):
The photometric weight
is given to the area within a medium large circle
in the centre of the monitor screen.
L CIRCLE (Large Circle):
The photometric weight
is given to the area within a large circle in the
centre of the monitor screen.
Each time you press
A
or
B
, the parameter
changes as follows.
** SET UP **
CAMERA ID *OFF
FLD/FRM FLD
ELC *ON
SHUTTER OFF
GAIN AUTO
SYNC *INT
BLACK BAL ABC
SCENE FILE *SCENE1
END
ALL MANU CENTER S CIRCLE (Small Circle)
M CIRCLE (Medium Circle) L CIRCLE (Large Circle)
Detection Area
ALL
Detection Area
50% Sensing
Area
CENTER
Detection Area
S CIRCLE
(Small Circle)
100% Sensing
Area
