-7-
SPECIFICATIONS
(with the combination of Optional Camera Head GP-KS162H)
Pick-up Device :
1/2-inch Interline transfer CCD image sensor with 752 (H) x 582 (V) pixels
Horizontal Resolution :
480 lines
Minimum Scene Illumination :
3 lux (F1.4 with AGC ON more than 30% of Y signal with set up)
5 lux (F1.6 with AGC ON more than 30% of Y signal with set up)
Signal to Noise Ratio :
50 dB (Standard condition, Y signal)
Video Output :
1.0 Vp-p/75 ohms, composite video, BNC connector x 2
Scanning System :
2:1 Interlace
Synchronization :
Internal Sync only
White Balance :
Auto Tracing White Balance (ATW)/Auto White Balance Control (AWC)/Manual (MANU)
Gain Control :
Auto Light On/Off, Video Level (Off/Manual)
Switches :
White Balance Mode (ATW/MANU/AWC), AWC SET (SET), Auto Light,
Video Level (Off/Manual)
Controls :
R, B gain, VIDEO Level
Power Source :
12V DC, 300 mA
Camera Cable Length :
GP-CA162/2 Cable 2-meter (6.6 feet), GP-CA162/3 Cable 3-meter (9.9 feet),
GP-CA162/38 Cable 3.8-meter (12.5 feet), GP-CA162/10 Cable 10-meter (33 feet)
Ambient Temperature :
−
10°C - +50°C (14°F - 104°F)
Dimensions :
Camera Control Unit : 120 (W) x 36 (H) x 157 (D) mm
4-11/16” (W) x 1-7/16” (H) x 6-1/8” (D)
Camera Head :
17 (Diameter) x 35.5 (D) mm, (2/3” (Diameter) x 1-1/2”(D))
Weight :
Camera Control Unit : 550 g (1.2 lbs.)
Camera Head :
14 g (0.035 lbs.)
Weight and dimensions indicated are approximate.
Specifications are subject to change without notice.
Optional Accessories
• Camera Cable GP-CA162/2, GP-CA162/3, GP-CA162/38 or GP-CA162/10
• C-mount Adaptor GP-AD22TA
• Wide Angle Lens GP-LM3TA or GP-LM7TA
• Pinhole Lens GP-LP12TA
• Tele Angle Lens GP-LM15TA or GP-LM24TA
• Camera Head GP-KS162H
