-12-
Image Sensor:
1 / 2“ interline transfer (IT) CCD image sensor
Pixels:
838 (Horizontal) x 1 164 (Vertical)
Scanning Standard:
625 lines, 50 fields, 25 frames
Synchronizing System:
Internal or External (Gen-lock), automatically switchable PAL standard
External (Gen-lock) Input: VBS / VS is selectable
Video Output:
Video Output : BNC Connector x 1
1.0 V [p-p] PAL composite / 75
Ω
Y/C (S-VIDEO) Output : S-VIDEO Connector x 1
0.7 V [p-p] Luminance level (Y) / 75
Ω
(S-VIDEO connector)
0.3 V [p-p] Burst level (C) / 75
Ω
(S-VIDEO connector)
RGB / SYNC Output : D-SUB 9-pin Connectors x 1
R / G / B :
0.7 V [p-p] each / 75
Ω
SYNC :
0.3 V [p-p] / 75
Ω
selectable
Required Illumination:
2000 lx at F5.6, 3200 K
Minimum Illumination:
5 lx (0.5 fc) at F1.4 with +18dB gain, 30 IRE level
Signal to Noise Ratio:
54 dB (Typical luminance) without aperture and gamma
Horizontal Resolution:
560 lines at center (Y signal)
White Balance:
ATW (Automatic Tracing White Balance Control), AWC (Automatic White Balance
Control) and Manual
Colour Bar:
Built-in EBU colour bar
Electronic Shutter:
Selectable : AUTO, 1/120, 1/250, 1/500, 1/1000, 1/2000, 1/4000 and 1/8000
Gain Selection:
AGC and Gain Up (OFF / LOW / HIGH)
Switches:
Power On/Off (POWER), Camera / Colour Bar Selection (CAM / BAR), Gain Selection
(AGC / OFF / LOW / HIGH (0 / +9 / +18dB)), Auto White Balance Set (AWC SET),
White Balance Selection (ATW / AWC / MANU), Shutter Speed Selection,
User File Selection (1 / 2 / 3 / 4)
Controls:
R gain, B gain and VIDEO Level
Lens Mount:
Special Mount
Power Source:
12V DC, 700 mA
Ambient Operating Temperature:
−
10°C - +40°C
Ambient Operating Humidity:
30 %- 90%
Dimensions:
Camera Head (Excluding Lens and Body Cap):
17 mm (Diameter) x 42 mm (11/16” x 1-5/8”)
Camera Control Unit (Excluding Rubber Feet and Connectors):
170 (W) x 43.5 (H) x 227 (D) mm (4-11/16”(W) x 1-7/16”(H) x 6-1/8”(D))
Weight :
Camera Head (Including Body Cap):
18
g
(0.04 lbs)
Camera Control Unit:
1.3
kg
(2.86 lbs)
Weight and dimensions indicated are approximate.
Specifications are subject to change without notice.
SPECIFICATIONS
• Camera Cable GP-CA1K/2, GP-CA1K/3, GP-CA1K/38 or GP-CA1K/10
• C-mount Adaptor GP-AD22TA
• Wide Angle Lens GP-LM7TA
• Pinhole Lens GP-LP12TA
• Tele Angle Lens GP-LM15TA or GP-LM24TA
• Camera Holder GP-AD1K
OPTIONAL ACCESSORIES
