background image

1.3 Accessories

11

[Optional accessories]

 PN54022-XX  1000BASE-SX SFP Module(i)

 PN54024-XX  1000BASE-LX SFP Module(i)

The XXs are identical to the intended nation of delivery codes.

Please be sure to confirm the content.
Please contact our distributor if any of the contents are insufficient.

1.4 Basic operation

This Product does not have a power ON/OFF switch. Connect the supplied power 

cord to this Ethernet Switch and connect the other end into an electric outlet.
This Ethernet Switch operates at AC 100 - 240 V (50/60 Hz).

When power is supplied, all the LEDs are turned ON.
Then, POWER LED (Power) lights in green, STATUS/ECO LED (Status/ECO mode) 
lights in orange, and self-diagnosis of hardware is executed.
On completion of self-diagnosis, POWER LED (Power), STATUS/ECO LED 
(Status/ECO mode) and TEMP LED (Temperature sensor) light in green, and the 
Ethernet Switch starts operation as a Ethernet Switch.
As this Ethernet Switch succeeds in communicating with a terminal connected to 
each port, LED of the port lights up.
When the terminal is not operating normally, for example when power is not 
supplied to the terminal, LED is not lighted.

Quantity

* For the configuration and management methods, please see the PDF 

version of the Operating Instructions on Panasonic’s website.

[Power Cord]

The following power cords are supplied as per the intended nation of delivery.

Locale

Thailand

250 VAC 6 A

TIS166-2549

-

Indonesia

250 VAC 10 A

250 VAC 10 A

250 VAC 5 A

CEE7/7

BS1363

BS1363

-

13 A

5 A

Malaysia

Singapore

Product Number

PN260496-TH

PN260496-ID

PN260496-MY

PN260496-SG

Power Cord Rating FUSE Rated Current

Plug Type

 Installation Guide (this document) 

1 (*)

 Rubber foot 

4

 Rack mount bracket (for 19-inch rack) 

2

Screw (for 19-inch rack) 

4

Screw (for fixing the mount brackets to the Ethernet Switch) 

8

Connection bracket (for connecting two Ethernet Switches) 

2

Screw (for fixing the connection bracket) 

8

 Power cord 

1

* Just the PN260496-TH has 1 Installation Guide in Thai (a total of 2 guides).

Summary of Contents for GA-ML4TWPoE++

























Reviews: