23
5.1.4. Extend Port Config
Select "Basic Config" and "Port Config" and then "Extend Port Config" to open the
screen shown in Figure 5-4. On this screen, you can display status and configure
mode and other settings for each port.
Figure 5-4 Extend Port Config
Screen Description
Global Jumbo Status Displays the jumbo frame settings. For all ports, the factory default setting is
"Disable".
Enable
The jumbo frame is enabled.
Disable
The jumbo frame is disabled.
Port Number
Displays the port number.
Type
Displays the port type.
1000T
The port type is 1000BASE-T.
Link Status
Displays the current link status.
Up
A link has been established successfully.
Down
A link has not been established.
Port Name
Displays the port name.
