9
■
After finishing installation, please confirm
whether fan body and adaptor assembly
are installed firmly.
10 Insert the fixed spring of louver assembly into the
groove, install the louver to the fan body. (Fig.11)
Flange
Ceiling board
Keep the gap in the range of 2
〜
3 mm
Screwdriver
Gloves
Gloves
Groove
Fixed spring
Louver
HOW TO INSTALL
6 Fix fan body firmly with 4 self-tapping screws
Φ
4.2x20.
(Fig.8)
7 Fix adaptor assembly and fan body firmly with
hexagon screw removed in step
②
. (Fig.9)
9 Install ceiling board, keep the gap of flange and
ceiling board in the range of 2~3 mm. (Fig.10)
8 Connect duct. refer to page 11
2. Connect duct
Hexagon screw
Sekrup hexagon
Self-tapping screw
Φ
4.2x20 (4 PCS)
CARA MEMASANG
Φ
6 Pasang badan kipas hingga kuat dengan 4 sekrup
4.2x20. (Gb. 8)
7 Pasang rangkaian adaptor dan badan kipas
hingga kuat dengan sekrup segienam yang
dilepas pada langkah
②
. (Gb. 9)
Setelah pemasangan selesai, pastikan badan
kipas dan rangkaian adaptor terpasang hingga
kuat.
8 Sambungkan pipa.
→
lihat halaman 11
2. Sambungkan pipa
9 Pasang plafon dengan menyisakan celah selebar
2~3 mm di antara lidah dan plafon. (Gb. 10)
10 Masukkan pegas terpasang di rangkaian kawat jala
ke dalam alur, pasang kawat jala / penutup ke badan
kipas. (Gb.11)
Φ
Sekrup
4.2x20 (4 BUAH)
Obeng
Sarung tangan
Lidah
Plafon
Sisakan celah selebar 2~3mm
Alur
Sarung tangan
Pegas terpasang
Kawat jala / penutup
Fig.8 / Gb.8
Fig.9 / Gb.9
Fig.10 / Gb.10
Fig.11 / Gb.11
Fan body
Badan kipas
