background image

INSTALLATION INSTRUCTIONS

WARNING

This symbol indicates the item is “PROHIBITED” to do.

This symbol indicates the  “COMPULSORY” item that must be followed 

without failure.

This symbol indicates the item is “CAUTION”.

Disconnect power supply before maintenance.

This product is not intended for use by persons (including children) with reduced physical, sensory 

    or mental capabilities, or lack of experience and knowledge, unless they have been given 

    supervision or instruction concerning use of the product by a person responsible for the safety. 

    Children should be supervised to ensure that they do not play with the product. 

The following instructions should be strictly observed in order to prevent injury to the users and other 

people, or damage to property.

The following symbols differentiate the levels of danger or injury that may result if the product is not 

used correctly as instructed. 

Types of instructions that should be observed have been classified and described by the following 

pictorial symbols.

WARNING

CAUTION

If the supply cord is damaged, it must be replaced by manufacturer or its service agent or a 

   similarly qualified person in order to avoid a hazard.

SAFETY INSTRUCTIONS

Please observe strictly

2

Otherwise,

 

it may cause the fire, electric 

shock and injury. Please contact the 

dealer for repair.

Do not disassemble this product for 

repair or reconstruction.

The product must be installed by 

professionals or trained personnel 

with equivalent expertise and skills 

according to the national wiring rules.

Otherwise, electric leakage, electric 

shock or a fire may be caused due to 

incorrect wiring, twisted wiring or wire 

clamping.

Improper practice of installation could 

cause an electric shock or a fire.

Do not install the product with a 

method which is not approved in the 

instructions.

Otherwise, it may cause electric shock 

when there is a fault or electric 

leakage.

The product must be grounded. 

Do not operate the product other 

than with the rated voltage 

(220 V~ 50 Hz)

.

Otherwise, it may cause damages to 

the product or a risk of fire.

This indication means: Must be treated seriously that this 

may result in death or serious injury.

This indication means: Must be treated seriously that this 

may result in injury or physical damage.

Summary of Contents for FV-15ZY1

























Reviews: