background image

MAINTENANCE

Outdoor filter

RA filter

Alkaline

detergent

Benzene

Metallic brush

Thinner

Kerose

ne

Alcohol

Alkalescent  detergent

Anti-mi

ldew 

detergent

Sol

vent

Clean the product only with neutral detergents. 

Do not use any of the chemicals or articles as shown, 

as they may corrode or scratch the product.

Notice

Notice

Please wear gloves during main-

tenance.

Please pay attention to the iden-

tifier of the filter when cleaning 

or replacing the filter.

The incisions of sheet metal and resin 

parts, as well as bulges and sharp 

corners of the product, may cause 

injury.

Otherwise, the purification efficiency 

may decrease.

CAUTION

About the service life of the filter

Cleaning

Replacement

 

About once a month

 

About once a month

About once every four to six months

Protect your eyes when cleaning or replacing the 

filter. Otherwise, dust attached on the filter may 

enter your eyes. If necessary wear eye protection.

To prevent the dust adsorbed on the filter from diffusing in the room during cleaning, please clean 

the filter outdoors or use a vacuum cleaner that can remove PM2.5 particles.

The service life of filter is set based on the operation of 10 hours every day.

The air volume and purification efficiency may decrease depending on the operating environment 

and time. When cleaning the outdoor filters, if you observe that the side to which the arrows of the 

outdoor filters point become black, please replace the outdoor filters in time.

If the product is used in an excellent environment and the concentration of particles with diameter 

below 2.5 µm is lower than 50 µ

g

/m

3

, the deviation of test data may be large due to the accuracy 

of the test instrument, leading to the decrease of the purification efficiency calculated based on the 

above test data.

If the energy recovery ventilator is used for a long time, the outdoor filters of the energy recovery 

ventilator will be blocked by dirt and dust, which will cause the decrease of the air exchange volume 

and air exchange effect, leading to louder noise. Please clean the outdoor filters regularly according 

to the amount of dirt and dust attached to the filters.

If the product is used in a harsh environment (dusty area), the air volume and purification 

efficiency of the product may decrease drastically. To maintain the performance of the product, 

please increase the frequency of cleaning or replacing the outdoor filter appropriately.

The replacement standard is evaluated according to the independent benchmark of the company. 

The actual operating environment may be different.

The test instrument used by the company is TSI 8530.

1.

2.

3.

4.

5.

6.

7.

18

Summary of Contents for FV-15ZY1

























Reviews: