Page
4
of
11
- Industrial Wireless IoT solution
Quick Start Guide
4.2.
Power the Bullseye Board
•
For demonstration purposes, connect a +5V USB power supply, or a computer USB port, to the USB
micro-B connector
(J1)
“USB Power+Data”
at the top left of the Bullseye board (Fig.5).
•
For programming and debugging, connect a computer port
to “USB2
PGRM” (J5)
. This port can also power the board by itself.
Note: The
“USB Power+Data” (J1)
port can be used simultaneously with
(J5) in order to provide more power, or to charge an optional battery.
•
If an optional battery (not provided) is connected at (J2):
o
To power the board from the battery, press the “Batt Power”
button (SW1) once
o
Make sure (LED18) turns ON after a small delay to indicate
that the MP2690’s Torch Mode is activated. This mode
disables its 16sec-minimum-load power down when load is
less than ~60mA drawn from the battery while in Boost mode.
o
On power-up the Torch mode is toggled ON automatically by
the PAN9520. Regular reset will toggle this mode off /on
o
To toggle the Torch mode manually, press the “Batt Power”
button (SW1) twice within the same second
o
To turn OFF the battery boost mode, first deactivate the torch
mode t
hen press the “Batt Power” button once hold it down
for more than 2.5sec
(Fig.5)
4.3.
Phone or Tablet App Setup
•
Connect your device to the WIFI network
•
Download and install the Espressif ESPTOUCH application from the Web Store
Developer:
ESPRESSIF SYSTEMS (SHANGHAI) CO., LTD.
,
Android:
https://play.google.com/store/apps/details?id=com.espressif.iot_esptouch_demo_ko&hl=es&gl=US
IOS
:
https://apps.apple.com/us/app/espressif-esptouch/id1071176700
