Panasonic FP3, Technical Manual

Page: 85 / 102

6-3. Table of FP3/FP5 System Registers
6-3. Table of FP3/FP5 System Registers
81
Number Description Default value Settable range
Memory Allocation
0
Sequence program memory size 8 FP3: 2 to 10k words
(See note 1. on the next page) FP3(16k type)&FP5: 2 to 16 words
1 Machine language program memory size 0 FP3: 0 to 8k words
(See note 1. on the next page) FP3(16k type)&FP5: 0 to 14k words
2 Comment memory size 3 Use default value “3”.
3 Unused – –
4 Unused – –
Internal I/O Setting
5
Counter start No. setting(See note 2.) 200 0 to 256
6 Timer/Counter hold area start No. setting 200 0 to 256
(See note 2. on the next page)
7 Internal relay hold area start No. setting 60 0 to 98
(See note 3. on the next page)
8 Data register hold area start NO. setting 0 0 to 2,04
(See note 3. on the next page)
9 File register hold area start No. setting 0 0 to 22,525
(See note 3. on the next page)
10 Link relay hold area setting for Link 0 0 0 to 64
(See note 3. on the next page)
11 Link relay hold area setting for Link 1 64 64 to 128
(See note 3. on the next page)
12 Link register hold area setting for Link 0 0 0 to 128
(See note 3. on the next page)
13 Link register hold area setting for Link 1 128 128 to 256
(See note 3. on the next page)
14 Step ladder hold/non-hold setting 1(Non-hold) 0:Hold, 1:Non-hold
15 Data output hold/non-hold setting 0(Non-hold) 0:Non-hold, 1:Hold
16 to 19 Unused – –
RUN Mode During an Error
20
Duplicate output 0(Disabled) 0:Output disable
1:Output enable
21 Output unit fuse blow 0(Stop) 0:Stop
22 Advanced unit error 0(Stop) 1:Continue
23 I/O verification error 0(Stop)
24 Watchdog timer time out 0(Stop) 0:Stop 1:Continue
(This register No. is only used by the FP5) Refer to system register No.30
25 Unused
26 Operation error 0(Stop) 0:Stop
27 Remote I/O slave link error 0(Stop) 1:Continue
28 I/O error in the Remote I/O slave station 0(Stop)
29 Unused – –
Wait Time Setting
30
Watchdog timer’s time out value 120(300 ms) 4 to 256(10ms to 640ms)
(This register no. is only by the used FP5)
31 Time setting for managing multiple frames 2,600(6.5s) 4 to 32,760(10ms to 81.9s)
32 Data transfer’s wait times setting for 800(2.0s) 4 to 32,760(10ms to 81.9s)
F145(SEND), P145(PSEND)/
F146(RECV), P146(PRECV) instructions,
F152(RMRD), P152(PRMRD)/
F153(RMWT), P153(PRMWT) instructions
(See note 4)
33 Assigned time for a program 5,000(10ms) 1,000 to 65,535
block-edition-in-RUN (2,000 to 131,070
µ
s)