Panasonic FP2 Series, Technical Manual

Page: 32 / 68

Parts and Its Functions FP2 Multi-wire Link Unit
2 - 6
2.1 Parts Terminology
:
ON
, : Rapid blinking (blinking interval: 0.2 sec), : Slow blinking (blinking interval:
1.0 sec), : OFF
LED Item
Operation
LED Item
W mode W2 mode F mode
PC - L
PC link flag
(effective only in W
d W2 d )
:PC link operation
status
:PC link operation
status
and W2 modes)
:PC link operation
disabled status
:Not used
:PC link
stopped/non - PC
link operation
status
:Non - PC link
operation status
:Not used
HI
Communication
d
:500kbps (fixed) :500kbps :500kbps (fixed)
speed
:250kbps
TERM.
Terminal station
:This is the terminal station. :This is not the terminal station.
1/17 -
8/24
Slave station
di
l ( ff ti
:Connected
8/24
9/25 -
display (effective
only in F mode)
:Not connected
9/25 -
16/32
only in F mode)
:Not used
* Slave station
numbers are
changed using the
slave station number
display selector
switch.
2.1.2 Slave Station Number Display Selector Switch
This is used to change the slave station number displayed on the operation status indica-
tor LEDs. It is used only in the F mode.
Item Setting contents
1 - 16 Connected station Nos. 1 to 16 are
displayed.
17 - 32 Connected station Nos. 17 to 32 are
displayed.