4 Getting started
the ETH0 connector to find the right device. The MAC address is printed on a label that
can be found on the unit's housing.
4. Open your browser and enter the URL https://192.168.0.xx/machine_config. Substitute
"xx" with the last digits of the unit's IP address.
Depending on your browser, an insecure connection warning may be displayed. Follow
the instructions in your browser to accept the connection. You will then be forwarded to
the Web interface of the FP-I4C unit.
5. Log in with the default user name "admin" and password "admin".
You are now in the system settings area of the FP-I4C Web interface where you can
make general network and service settings or change the user interface language.
We recommend that you change the default password as soon as possible.
6. Select “Application Settings” to go to the application settings area.
You are now ready to configure the services required for your application.
Related topics
Change the default user names and passwords
4.5
Change the default user names and passwords
For security reasons, we recommend that you change the default passwords in the FP-I4C
Web interface.
You can set different passwords for the administrator and standard users. There are certain
access restrictions for standard users such as deleting log files.
If you forget your password, you must reset the FP-I4C unit to the default settings with the
reset tact switch.
Allowed characters for passwords: All letters, numbers and special characters (e.g. #!$).
Default user names and passwords:
Service
User name
Password
Configuration/SSH (if enabled)
admin
admin
SSH (if enabled) standard user
user
user
FTP server (if enabled) for logged data
log
log
1. Go to “System Settings” > “Authentication”.
2. Select “EDIT” to change the passwords.
Related topics
FP-I4C
29
