Panasonic FHD351 - B/W Thermal Transfer Operating Instructions Manual Download

Page: 88 / 104

Cleaning

For Fax Advantage assistance, call 1-800-435-7329.

Thermal head

If smudges or black/white lines appear on a copied or received document, check whether there is dust
on the thermal head. Clean the thermal head to remove the dust.

Disconnect the power cord and the
telephone line cord.

Open the front cover by pulling up the
center part.

Push the back cover open button (green) on
the right side of the unit.
OR
Push the back cover open lever (green)
inside of the unit.

Open the back cover.
Remove the ink film.

Clean the thermal head with a cloth
moistened with isopropyl rubbing alcohol,
and let it dry thoroughly.

Caution:

To prevent a malfunction due to
static electricity, do not use a dry
cloth and do not touch the thermal
head directly.

Power cord

Telephone
line cord

Center part

Front cover

Back cover
open lever (green)

Back cover
open button
(green)

Back cover

Thermal head

Summary of Contents for FHD351 - B/W Thermal Transfer









































































































Search results

Summary of Contents for FHD351 - B/W Thermal Transfer

Reviews:

Related manuals for FHD351 - B/W Thermal Transfer

Brands by name

Popular brands

Panasonic FHD351 - B/W Thermal Transfer, Operating Instructions Manual

Search results

Summary of Contents for FHD351 - B/W Thermal Transfer

Reviews:

Related manuals for FHD351 - B/W Thermal Transfer

Brands by name

Popular brands