4. Wind a sealing tape on the tank attach-
ing potion of the fiber mounting joint,
then mount on the tank. Tighten the
a wrench.
Tank
<How to mount>
1. Assemble the fiber mounting joint as
However, when tightening the union nut
on the body, keep a space so that the
protective tube can be inserted.
-
ing joint at the desired point by hand
till it is firmly fixed, then slowly further
tighten the nut one and a half turns by
using a wrench.
Union nut
Body
Protective tube
!" #$%&
Union nut
MOUNTING ON A TANK
2
' When mounting this product on a tank,
MS-FX-03Y
"-
ed product.
' Mount the product on a tank under the
condition that a pressure is not applied
to the tank and the liquid temperature
is between -10 to +40°C.
<Recommended products>
())*()//2#)235(637/
Flowell Co., Ltd.
Note: For details of the recommended products, contact the each manufacturers.
Fiber mounting joint
MS-FX-03Y
*
MOUNTING OF FIBER ATTACHMENT
3
4. Insert the fiber cables into the holes
89$%$;<#= "
keeping the condition in the step 3.
Insert the fiber cables till the fiber at-
tachment stops.
? @82= "
"
"-
prox. 0.5mm from the holder tip.
30mm or
more
Possible cutting
range
Protective tube
Fiber
Fiber cutter
FX-CT3
82=
<How to mount>
1. Mount the holder on the gland lightly.
6
Holder
Fiber
2
2. Insert the fiber cables into the holder
$
the desired length is reached.
3. Tighten the holder.
(G $ "!
""" $JK " "
more than 10 times makes the cut surface worth and the sensing performance de-
teriorate.
"")" "7O
& @" "7!""
?
FX-CT3
Q"R"
FD-F41Y
and
FD-HF40Y
. Do not use it for
other fibers.
6. 2" "7""
(G X "! "" "
7 " "
!!" !
' Mount the fiber attachment
FX-AT4
"" "
"" "
" "
' "" "
FX-CT3
before insertion into
' Y " "7J"
of the protective tube should be left with the fiber attachment mounted.
However, in case of mounting a liquid preventive joint
MS-FX-01Y
7
30mm or more cables from the liquid preventive joint is required.
' Take care that the sensing performance may deteriorate depending on
"" "
For details of fiber amplifiers, refer to the instruction manual enclosed
"
4. Adjust the joint of the protective tube
with the center position of the protective
tube extending joint. Tighten the union
nut by hand till it is firmly fixed, then
slowly further tighten the nut one and a
half turns by using a wrench.
Union nut
Union nut
PREPARING PROTECTIVE TUBE
1
Cutting off the protective tube
' Z!" "R "
FX-CT3
. Do
" "R "7"
""
' Impossible cutting range of the protec-
tive tube is 50mm from the tip of the
protective tube.
<How to cut>
1. Insert the protective tube into “ø4
K;<= "
Find desired cutting point by using the
blade recess as a indicator.
Y 82=
" "R
once.
The protective tube is cut.
82=
2. Insert the protective tube for extending
Protective tube
Protective tube for
extending
)
Extending the protective tube
' In case of extending the protective tube, use the protective tube extend-
ing joint
MS-FX-02Y
' ) "R Q 9&7 "!-
GJ?7)2
<How to extend>
1. Assemble the protective tube extending
However, when tightening the union nut
on the body, keep a space so that the
protective tube can be inserted.
Union nut
Union nut
Body
Impossible cutting
range: 50mm
Fiber cutter
FX-CT3
Protective tube
<Bottom view>
Blade recess
3. Insert the protective tube extending joint
Protective tube
Protective tube for
extending
INSTRUCTION MANUAL
/O/RX"/O[""
FD-F41Y
,
FD-HF40Y
Z\<[X&J](JJ[$^_
Thank you very much for purchasing Panasonic products.
Please read this Instruction Manual carefully and thoroughly for the correct
and optimum use of this product.
5! "R"O"!"
