Panasonic F-VXR70H, Operating Instructions Manual

Page: 23 / 52

VXR70H
23
When you feel confused
Q9
Turning the front indication off.
A
●
The front indication can be turned off.
●
Press and
simultaneously and hold for approximately
3 seconds while the product is operating
or off. (The front indication is turned off.)
●
To turn on again, press the buttons
simultaneously and hold for 3 seconds
again. (The front indication is lit.)
Q10
The front indication turns off while the
product is operating.
A
●
In “Light sensor mode”, the “Light sensor”
detects the brightness in the room and
automatically adjusts the brightness of the
front indication. If the product is operating
with “Light sensor 1”, the front indication
turns off when the room becomes dark.
(The “Humidity indicator” turns half on.) (P.21)
Q11
The “Human activity sensor” does not
detect anything?
A
●
The “Human activity sensor” does not
operate for 2 minutes after inserting the
power plug as the product is warming up.
●
The “Human activity sensor” cannot detect
people outside of its range of detection, or if
there is furniture or other objects in the way.
●
The sensor may have difficult detecting
people due to the temperature difference
between people and the surrounding area, or
if the people are not
moving much.
●
Is the “Human activity
sensor” lens dirty?
→ Remove any dirt with a
cotton swab.
Q12
The “Human activity sensor indicator”
turns on even when no one is moving.
A
●
If there are changes in temperature, such as
when an oscillating heater is used, the
sensor may detect movement even if there is
no one moving.
Q13
To turn off the “Human activity sensor”
detection.
(Change the sensitivity of the sensor)
A
●
The sensitivity of the “Human activity sensor” can
be changed. (The initial setting is [Standard].)
1
Stop operation, then press and hold
and simultaneously.
(“Humidity indicator” is lit in order.)
2
Release the buttons when the sensitivity you
want is obtained.
(“Humidity indicator”)
Standard: To set ideal sensitivity
OFF: To stop detection
High: To set high sensitivity
Human activity
sensor lens
Q14
Using “House Purifying” mode when
people are in the room.
A
1
Turn off the “Human activity sensor” detection.
(Q13)
2
Set the product to “House Purifying” mode.
The product operates in [Preparation mode]
for approximately 5 minutes, and [Cleaning
mode] for approximately 60 minutes. After
[Cleaning mode] is complete, the product
switches operation to clean air mode
(automatic air volume and airflow).
If dirt is detected, the product operates in
[Cleaning mode] again.
3
To end, press to cancel “House
Purifying” mode.
The product returns to the operating mode
before “House Purifying” mode.
Q15
There is dust in the room even after
running “House Purifying” mode.
A
●
“House Purifying” mode cleans dirt in the air,
and cannot remove dust on the floor.
Q16
“PM 2.5 detection indicator” does not flash?
(Change the PM 2.5 sensitivity)
A
●
The PM 2.5 sensitivity can be changed.
(The initial setting is [Standard].)
1
Stop operation, then press and hold
and simultaneously.
(“Timer (Child Lock) indicator” is lit in order.)
2
Release the buttons when the sensitivity you
want is obtained.
(“Timer (Child Lock) indicator”)
High: To set high sensitivity
Standard: To set ideal sensitivity
Q17 Turning off ECONAVI mode.
A
●
ECONAVI mode can be turned off.
●
Press and
simultaneously and hold for approximately
3 seconds while the product is operating
with the “Air volume” setting to [Auto].
(The “ECONAVI indicator” is turned off.)
●
To restart ECONAVI mode, while the
product is operating with the “Air volume”
setting to [Auto], press the buttons and
hold for 3 seconds again.
(The “ECONAVI indicator” is lit.)
Q18
Turning off nanoe
®
.
A
●
nanoe
®
operation can be turned off.
●
During operation, press and
simultaneously and hold for
3 seconds.
(The “nanoe
®
indicator” is turned off.)
●
To restart nanoe
®
operation, press the
buttons and hold for 3 seconds again.
(The “nanoe
®
indicator” is lit.)