Dirt sensor
<about once every 3 months>
Deodorizing filter
HEPA composite filter
<about once every 2 weeks>
VXR70H
15
Operating
methods
Care and
maintenance
Reference time for the filter replacement
(Service parts: P.25)
Replacement
period
Conditions
HEPA
composite filter Once every
10 years*
When 6 cigarettes have been
smoked daily. (Japan Electrical
Manufacturers’ Association
standards JEM1467)
Deodorizing filter
*Filter replacement period may be greatly shortened,
depending on the use environment and conditions. (For
example, smoking is frequent.) When the effect has
faded, replace the filter.
●
After replacing the filters, press and hold
and
simultaneously for 3 seconds to reset
the product. (The indicator is turned off.)
●
After replacement, fill the date installing the filter in
the label and stick it on the back of the product.
●
Dispose of the used filter as inflammable garbage.
Attention
●
Do not operate the product with the HEPA composite
filter removed.
(It may make it impossible to obtain the effect to clean air,
or may cause failure due to dusts entering the product.)
●
Do not operate the product with the deodorizing filter removed.
(Doing so may cause insufficient deodorizing effects.)
●
Safely keep the parts removed from the product when cleaning.
(Otherwise you may trip over them. Or the parts may
be damaged.)
When idle for a long time
1
Disconnect the power plug.
(The product consumes power even at rest.)
2
Empty the tank and tray and clean all the parts.
3
Dry their interiors completely.
(Otherwise, the product may fail due to rust.)
●
Dry the humidifying filter completely in the shade.
(Otherwise, fungus may occur.)
4
Cover the product with poly-bag, and keep in dry places.
(Do not keep it laid down or upside down, otherwise,
failure may occur.)
Before cleaning
WARNING
■
Be sure to disconnect the power plug.
●
Do not use the detergents or
other substances on the right.
●
When using chemically treated
cloth, follow its instructions.
Care and maintenance
No maintenance required
(
Installation and removal→P.8)
If dust has accumulated around the deodorizing filter,
remove it with a vacuum cleaner or similar appliance.
●
Do not wash with water.
Remove dust on the black surface
(the front side) with a vacuum
cleaner or similar appliance.
(Installation and removal
→P.8)
●
Do not apply excessive force because it is easy to
be damaged.
●
No maintenance is required on the white surface
(the rear side).
●
Do not wash with water.
Lay the filter on
newspaper etc.
Deodorizing filter /
HEPA composite filter /
Dirt sensor
Wipe dirt off the lens with dry
cotton swab.
●
Regularly wipe the lenses (2 locations).
(The sensor may not work normally when it is
contaminated with moisture or tar of cigarette.)
1
Remove the
sensor cover.
2
Wipe dirt off with dry cotton
swab.
Lenses (2 locations,
left and right)
Dry cotton swab
●
Be sure to disconnect the power plug before
cleaning the sensor.
●
Do not insert the cotton swab anywhere other
than the lens.
●
Illuminate the area when you do not see clearly.
Summary of Contents for F-VXR70H
Page 51: ...VXR70H 51 ...
