51
When you feel
confused
VR901
Q12
The presence detection indicator turns
on even when no one is moving.
A
●
If there are changes in temperature, such as
when an oscillating heater is used, the
sensor may detect movement even if there
is no one moving.
Q13
To turn off the presence sensor
detection. (Change the sensitivity of
the sensor)
A
●
The sensitivity of the presence sensor can be
changed. (The initial setting is [
中
(Standard)].)
Stop operation, then press and hold
and
simultaneously.
(“Humidification”indicatorislitinorder.)
Release the buttons when the sensitivity you
want is obtained.
(“Humidification”indicator)
Standard: To set ideal sensitivity
OFF: To stop detection
High: To set high sensitivity
Q14
Using“
外出净化
(Absencecleaning)”
mode when people are in the room.
A
Turn off the presence sensor detection. (Q13)
Settheproductto“
外出净化
(Absencecleaning)”mode.
The product operates in [Preparation mode]
for approximately 5 minutes, and [Cleaning
mode] for approximately 60 minutes. After
[Cleaning mode] is complete, the product
switches operation to clean air mode
(automatic air volume and airflow).
If dirt is detected, the product operates in
[Cleaning mode] again.
To end, press
to cancel
“
外出净化
(Absencecleaning)”mode.
The product returns to the operating mode
before“
外出净化
(Absencecleaning)”mode.
Q15
There is dust in the room even after running
“
外出净化
(Absencecleaning)”mode.
A
●
“
外出净化
(Absencecleaning)”
cleans dirt in
the air, and cannot remove dust on the floor.
Q16
Changing the PM2.5 detection
concentration.
A
●
The detected concentration can be changed.
(The initial setting is [35 µ
g
/m
3
].)
Stop operation, then press and hold
and
simultaneously.
(The PM2.5 concentration indicator is lit in turn.)
Select
or
.
Q17
Turning off Econavi operation.
A
●
Econavi operation can be turned off.
●
Press
and
simultaneously and hold for approximately
3 seconds while the product is operating
withthe“Airvolume”settingto[
自动
(Auto)].
(The Econavi indicator is turned off.)
●TorestartEconavioperation,whilethe
productisoperatingwiththe“Airvolume”
setting to [
自动
(Auto)], press the buttons
and hold for 3 seconds again.
(The Econavi indicator is lit.)
Q18
Turningoff“nanoe
TM
”.
A
●
nanoe™operationcanbeturnedoff.
●
During operation, press
and
simultaneously and hold for
3seconds.(Thenanoe™indicatoristurnedoff.)
●
Torestartnanoe™operation,pressthe
buttons and hold for 3 seconds again.
(Thenanoe™indicatorislit.)
Q19
Changing the Humidity / PM2.5
concentration indicator display.
A
●
The Humidity / PM2.5 concentration
indicator display can be displayed.
(The initial setting is [Turn on alternately].)
While the product is operating or off, then
press and hold
and
simultaneously.
(The Humidity / PM2.5 concentration
indicator blinks.)
Release your finger from the button at the
desired display.
(Humidity / PM2.5 concentration indicator)
Turn on alternately: To alternately
display the humidity
and PM2.5
concentration
Blinking: To constantly display
the humidity
Blinking: To constantly display
the PM2.5 concentration
Summary of Contents for F-VR901
Page 2: ...2 ...
Page 55: ...VR901 55 ...
