Panasonic F-P04DXZ, Operating Instruction

Page: 7 / 16

Replacement filter
Part No.
F Y104WZ -
Date installed:
Replacement filter
Part No.
F Y504WZ -
Date installed:
1
・
● ●
●
2
3
●
●
●
●
・
・
・
・
Before use
Put down the date of first
use on the label at the rear
on the air purifier
While the room air is clean,
insert the power plug into a
wall socket.
Write the date you begin using the air
purifier on the label of the main unit.
This can be used as a guide for
replacing the composite air filter and
deodrizing filter.
Remove the air intake grille, and
set the sensor switch.
The sensor switch is normally set to “Lo”.
If you feel that the sensitivity is too low,
set it to “Hi”.
The sensors record and set pollution
standard of the indoor air after the power
plug is inserted.
Eliminated odors from the room as such as
possible before inserting the power plug.
(Pollutant sensor characteristics
page 8)
Leave a distance of at least 30 cm between the air inlet and the wall or nearby furniture in order to allow
the air in the room circulates freely.
Position the air purifier at least 1 meter away from appliances such as TVs and radios.
Do not run the air purifier from the same wall socket as a TV or radio.
(Picture or sound interference may occur.)
If air purifier is used in the same place for a long period of time, the wall surfaces around the air purifier
may become dirty.
Pull up on the tabs (2) on the top of the
air intake grille.
Tabs (2)
Protrusions (6)
Holes (6)
Insert the protrusions (6) on the inside of the
air intake grille into the holes (6) in the main unit,
and press down securely.
Air purifier location
Removing the air intake grille Installing the air intake grille
Main unit label (Rear)
Put down the date
of first use.
Sensor switch
Pollutant sensor
Power plug
Air intake
grille
7