6
*3
The sensing range and the sensing object of the retroreflective type sensor are specified for the RF-200 reflector. The sensing range specified refers to the
setting range for the sensor when used with the reflector; the sensor itself can detect an object less than 30mm away. If the distance to the reflector is 100mm
or less, the sensing object should be opaque.
*4
With 200 x 200mm non-glossy paper. If you use this product at a sensing range of 50mm or less, the sensitivity adjustment range becomes extremely narrow.
*5
Convergence point: 10mm. With 50 x 50mm white non-glossy paper.
*6
Convergence point: 10mm. With 50 x 50mm white non-glossy paper. Spot diameter 1mm with a setting distance of 10mm.
*7
With 100 x 100mm white non glossy paper. Spot diameter 5mm with a setting distance of 80mm.
*8
Setting distance between emitter and receiver: 1m.
*9
Setting distance between emitter and receiver: 2m.
*10
Setting distance: 10mm.
*11
Min. ø1mm copper wire. Setting distance: 80mm.
Rugghölzli 2
CH - 5453 Busslingen
Tel. +41 (0)56 222 38 18
Fax +41 (0)56 222 10 12
www.sentronic.com
Produkte, Support und Service
SENTRONIC
AG
