32
Engli
sh
Specifications
Product name
Oral Irrigator
Product model
EWM1311
Rated input
100–240 V 50–60 Hz
35 mA
Charging time
Approx. 15 hours
Place of origin
Thailand
Date of
production
See engraving on the commodity.
Execution
standard
GB4706.1 Annex B
GB4706.59
Power source
See the name plate on the product
(Automatic voltage conversion)
Power
consumption
Approx. 1 W
Pump frequency Approx. 1400 pulses/minute*
Water pressure
“
喷射
” (JET):
Approx. 590 kPa (approx. 6.0 k
g
f/cm²)
“
气泡(普通)
” [AIR IN (REGULAR)]:
Approx. 390 kPa (approx. 4.0 k
g
f/cm²)
“
气泡(轻柔)
” [AIR IN (SOFT)]:
Approx. 200 kPa (approx. 2.0 k
g
f/cm²)
Operating time Approx. 15 minutes*
(at 20 °C when fully charged)
Tank volume
Approx. 130 mL (approx. 35 seconds*)
Dimensions
Main unit: 197 (H) x 59 (W) x 75 (D) mm
(Not including nozzle)
Charger: 40 (H) x 93 (W) x 98 (D) mm
Mass
Main unit: Approx. 305
g
(Including nozzle)
Charger: Approx. 180
g
* When using “
气泡(普通)
” [AIR IN (REGULAR)] mode
This product is intended for household use only.
Changing the nozzle (Sold separately)
• If the tip of nozzle gets deformed, please replace with
a new nozzle.
• The nozzle is a consumable. The nozzle should be
replaced with a new one every 6 months or so due to
hygiene reasons, even if its shape is unchanged.
• Optional nozzles with identification ring to allow
several persons to share the main unit.
New nozzle (tip) Deformed (worn) nozzle (tip)
Part number
Replacement Nozzle for EWM1311
EW0950
Nozzle
EWM1311_CH.indb 32
2018/11/16 17:07:51
