14
English
Cleaning the charger
1. Disconnect the power plug from the household outlet.
2.
Slide and remove the main unit
guide from the charger base.
3. Wash the main unit guide with
water.
Wipe off water after washing.
• Do not rinse with water
except the main unit guide.
4. Wipe off any dirt on the charger
base using a soft cloth.
►
Attaching the main unit guide
Align the main unit guide with the designated lines on
the charger base and then slide the main unit guide
until it clicks into place.
Wipe the prongs of the power plug with a
dry cloth about once every 6 months.
Cleaning the brush stand
Wash and wipe off water�
►
After cleaning
Wipe off water from the brush head and main unit for
storage.
•Do not charge while it is wet. Doing so may cause
soiling.
►
If the identification ring comes off
Attach by aligning the indentation (
a
) in
the brush head with the raised part (
b
)
of the inside of the identification ring.
•
Do not forcefully pull the identification ring.
Doing so may cause damage.
•
Using the toothbrush without the identification ring
has no effect on its performance.
EW-DL34_ASIA.indb 14
2018/12/27 9:09:32
