background image

CLASSIFICATION 
Einstufung 

PRELIMINARY 

No. 
DS-Eval4555-2400 

REV. 

01 

SUBJECT 
Thema 

EvalBoard PAN4555 

 

PAGE 
Seite 

 

16  of  16 

CUSTOMER’S CODE 
EvalPAN4555 

PANASONIC’S CODE 
 

DATE 
Datum 

 

30.03.2007 

 

 

European Technology Center 

Panasonic Electronic Devices (EUROPE) GmbH 

APPROVED 

genehmigt 

CHECKED 

geprüft 

DESIGNED 

Erstellt 

 

 

14. GENERAL  INFORMATION 

 
This product description does not lodge the claim to be complete and free of mistakes. 
Please contact the related product manager in every case. 
 
If we deliver samples to the customer, these samples have the status Engineering Samples. 

This means, the design of this product is not yet concluded. Engineering Samples may be 

partially or fully functional, and there may be differences to be published Data Sheet. 
Engineering Samples are not qualified and are not to be used for reliability testing or series 

production. 
 

Waiver: 
 

Customer acknowledges that samples may deviate from the Data Sheet and may bear defects 

due to their status of development and the lack of qualification mentioned above. 
Panasonic Electronic Devices (Europe) GmbH rejects any liability or product warranty for 

Engineering Samples. In particular, Panasonic Electronic Devices (Europe) GmbH waives 

liability for damages caused by 

• 

the use of the Engineering Sample other than for Evaluation Purposes, particularly the 

installation or integration in an other product to be sold by Customer, 

• 

deviation or lapse in function of Engineering Sample, 

• 

improper use of Engineering Samples. 

Panasonic Electronic Devices (Europe) GmbH  waives any liability for consequential and 

incidental damages. In case of any questions, please contact your local sales partner or the 

related product manager. 

 

15. LIFE SUPPORT POLICY 

 

This Panasonic Electronic Devices (Europe) GmbH  product is not designed for use in life 

support appliances, devices, or systems where malfunction can reasonably be expected to 

result in a significant personal injury to the user, or as a critical component in any life support 

device or system whose failure to perform can be reasonably expected to cause the failure of 

the life support device or system, or to affect its safety or effectiveness. Customers using or 

selling these products for use in such applications do so at their own risk and agree to fully 

indemnify Panasonic Electronic Devices (Europe) GmbH  for any damages resulting. 
 

Summary of Contents for EvalBoard PAN4555

















Reviews: