4.
Place the frame on the projector so that it is
aligned with the screw hole positions.
(Make sure that the forward/back direction is
correct when installing. If the direction is reversed,
the hole positions will not match up.)
Secure the projector to the frame using the six
screws (M10x35) and the twelve flat washers (M10).
Do not forget to use the washers as they are
responsible for the galvanic isolation.
Torque: 20 ± 1 Nm
INSTALLING THE PROJECTOR IN THE FRAME
screw (M10x35)
flat washers (M10)
Please make sure to use
ONLY
the
correspondent screw holes when
installing a projector!
Before installing of the frame,
remove the handles on the front and
the back of the projector.
