Manual FRAME-EVO-P14 / P14-US
02.01.2020
Page 16 of 38
Step 3: Place the recommended number of Ø6 Schnorr Washers (2) over each
corresponding hole. Secure the recommended number of M6x20 ISO 7380 screws (1) into
each hole with 4 Nm torque. Ensure each screw runs through the plate and catches into the
corresponding M6 hole in the projector surface. Please make sure to use only the
correspondent screw holes when installing a projector!
Do not forget to use the Ø6 Schnorr Washers (2) as they are preventing the screws to loose
themselves!
In case you removed the upper ring during Step 1 please now refer to chapter
“7. Reinstalling the Upper Ring” and attach the upper ring back to the base.
Step 4: The lens can be attached back to the projector.
Torque: 4±0.5 Nm
1
2
