Installing the Interface Board
ENGLISH - 7
Installing the Interface Board
It is recommended to ask a qualified technician to install or remove the
Interface Board to a projector. A malfunction may occur due to static
electricity. Consult your dealer.
Before installing or removing the Interface Board
f
Always turn off the power of the projector before installing or removing the
Interface Board.
g
Make sure to follow the procedure described in the Operating
Instructions of your projector when turning off the power.
f
Do not touch the connector section of the Interface Board directly with your
hands.
g
The component may be damaged by the static electricity.
f
To prevent the static electricity damage, remove the static electricity in your
body by touching the surrounding metal, etc. beforehand.
f
Take care not to get injured when installing or removing the Interface
Board.
g
Hands may be injured by the opening of the blank slot of the projector or
the edge of the bracket of the Interface Board.
f
When installing the Interface Board to the slot, insert it into the connector
straight and slowly.
g
It may not operate or cause malfunction if it is not correctly installed.
ET-MDNDP10C_DPQX1381ZA_E.indb 7
2019/03/15 9:53:10
