#
Check that the area around the
lamp unit has cooled down.
$
Use a Phillips screwdriver to turn
the lamp unit cover fixing screws
at the bottom of the projector,
and then remove the lamp unit
cover from the projector.
E
NGLISH
-3
%
Use a Phillips screwdriver to
loosen the two lamp unit fixing
screws until the screws turn
freely. Then hold the handle of
the lamp unit and gently pull it
out from the projector.
&
Insert the new lamp unit while
making sure that the direction
of insertion is correct, and then
use a Phillips screwdriver to
securely tighten the lamp unit
fixing screws.
When inserting the new lamp
unit, be sure to push it in at the
point
A
and
B
.
'
Install the lamp unit cover, and
then use a Phillips screwdriver
to securely tighten the lamp
unit cover fixing screws.
(
Insert the power cord plug into
the wall outlet and then press
the MAIN POWER switch.
)
Press the POWER button so
that a picture is projected onto
the screen.
*
Press the MENU button to
display the menu screen, and
then press the
F
or
G
button
to select the “OPTION” menu.
Lamp unit replacement procedure
NOTE:
B
Be sure to install the lamp unit
and the lamp unit cover
securely. If they are not
securely installed, it may cause
the protection circuit to operate
so that the power cannot be
turned on.
A
B
Lamp unit cover
Lamp unit cover fixing screws
Handle
Lamp unit fixing screws
p05-12(LAX100)en̲fr 07.4.9 23:29 ページ 3
