Panasonic ET-JPF200BU, Operating Instructions Manual

Page: 5 / 16

ENGLISH - 5
Product composition
Check that the package contains the following parts. The number enclosed in < > is the quantity.
Floor stand <1> This stand is mounted to the projector to enable floor
standing installation.
There are rubber feet at three places on the bottom of
the stand.
The stand comes in two colors.
ET-JPF200BU: Black
ET-JPF200WU: White
Power cord
(K2CG3YY00183) <1>
This is connected to the <AC IN> socket of the optional
projector.
Screw with captive washer (M4×8) <4>
(ET-JPF200BU: XYN4+F8FJK)
(ET-JPF200WU: 4112055002)
These items secure the floor stand to the projector.
Attention
z
After removing the product from the package, dispose of the power cord cap and packing material appropriately.
z
Do not use the supplied power cord with equipment other than a specified projector.
z
If any part is missing, contact the dealer.
z
Store small parts appropriately in a place out of the reach of infants and small children.
Note
z
The part numbers of the parts are subject to change without notice.
z
The illustrations of the product components, the projector or the assembling condition of the product and
projector, etc. may differ from the actual equipment.