ENGLISH - 11
Mounting procedure (continued)
Tab
3) Close the connector secure lock.
z
Push until the tab of the connector secure lock
clicks into place.
■
Power cord disconnection procedure
1) Make sure that the projector is in the standby
state and then remove the power plug from the
power outlet.
Tab
2) Push down on the tab of the connector secure
lock to release it.
z
To release it when the projector is standing on
the floor, release the tab while lifting up the
power supply unit.
Guide
3) Remove the connector secure lock by sliding it
along the guides on the <AC IN> socket.
4) Pull out the connector of the power cord from
the <AC IN> socket.
z
Be sure to press the power supply unit with one
hand, hold the power connector and pull it out
with another hand.
Summary of Contents for ET-JPF200BU
Page 15: ...ENGLISH 15 MEMO ...
