Panasonic ET-JPF100BU, Operating Instructions Manual

Page: 5 / 16

ENGLISH - 5
Product composition
Check that the package contains the following parts. The number enclosed in < > is the quantity.
Floor stand <1> This stand is mounted to the projector to enable floor
standing installation.
There are rubber feet at four places on the bottom of
the stand.
The stand comes in two colors.
ET-JPF100BU: Black
ET-JPF100WU: White
Power cord
(K2CG3YY00183) <1>
This is connected to the <AC IN> socket of the
projector.
Screw, captive washer (M4×8) <4>
(ET-JPF100BU: XYN4+F8FJK)
(ET-JPF100WU: 4112055002)
These secure the floor stand to the projector.
Attention
z
After removing the product from the package, dispose of the power cord cap and packing material appropriately.
z
Do not use the supplied power cord with equipment other than a specified projector.
z
If any part is missing, contact the dealer.
z
Store small parts appropriately in a place out of the reach of infants and small children.
Note
z
The part numbers of parts are subject to change without notice.
z
The product composition, projector, combination of the product and projector, etc. shown in the illustrations may
differ from the actual equipment.