ENGLISH-5
1) With this lens already passed
through the lens mount cover that
came with your projector, align the
positioning guide with the guide
groove on the projector, and insert
the lens fully.
z
There is a red dot at the bottom right
end of the positioning guide.
2)
Turn the fixed-focus lens clockwise
until you hear a click.
3) Attach the lens mount cover to the
projector.
z
Turn the lens mount cover clockwise
to fix it in place.
Attention
z
Gently turn the projection lens
counterclockwise to check that it will not
fall out.
Attaching the Lens
Attaching the Lens / Detaching the Lens (continued)
z
Be sure not to touch the light projecting surface or the surface of the lens. Any fingerprints
or smudges on these surfaces will be magnified and lower the quality of the image
displayed on the screen.
z
The light projecting surface and lens are made of glass. The lens could be damaged if
brought into contact with or rubbed against hard objects. Handle the lens carefully.
z
Use a clean, soft, and dry cloth to wipe away dust and dirt from the light projecting surface
and projection lens. Do not use fluffy cloths containing oil, water or dust for cleaning.
z
When the Fixed-focus lens is removed from the projector, place it with the light projecting
surface facing downwards.
* Unless specified otherwise, the illustrations in these operating instructions show the lens used
with the
PT-FDZ97C
projector.
Guide groove
Lens mount cover
Positioning guide
Fixed-focus lens
