ENGLISH-7
Preparation (continued)
2) Loosen the mounting screws in
four places on the attachment
mount bracket.
z
Provide a gap of about 2 mm
between the attachment mount
bracket and base bracket.
3) Pull together the tabs at the top
and bottom of the attachment
mount bracket and align the
lens fixed attachment with the
circular recesses in the front
panel of the projector.
4) Push the tabs of the attachment
mount bracket against the
recesses in the base bracket
and then tighten the mounting
screws in four places.
Attention
z
Push the tabs so that they are parallel
against the recesses.
Mounting
screws
Mounting
screws
Mounting
screws
Mounting
screws
Tabs
Tabs
