ENGLISH-3
Read this first!
Always follow these precautions
WARNING:
Do not look at or place your skin into the light emitted from the lens while the
projector is being used.
Doing so can cause burns or loss of sight.
z
Strong light is emitted from the projector’s lens. Do not look at or place your hands
directly into this light.
z
Turn off the power when moving away from the projection lens or projector.
Do not project an image with the lens cover attached.
z
Doing so can cause fire.
CAUTION:
Before replacing the projection lens, be sure to turn off the power and
disconnect the power plug from the wall outlet.
z
Unexpected projection of light may cause injury to eyes.
z
Replacing the projection lens without removing the power plug may result in electric
shock.
Do not stand in front of the lens while the projector is being used.
Doing so can cause damage and burns to clothing.
z
Strong light is emitted from the projector’s lens.
Do not place objects in front of the lens while the projector is being used.
Doing so can cause fire, damage to the object, or malfunction of the lens and
projector.
z
Strong light is emitted from the projector’s lens.
Do not open the desiccant bag. Do not eat the contents.
Inadvertently ingesting desiccant could be harmful.
z
If the desiccant gets into your eyes or mouth, immediately rinse with plenty of water
and seek medical attention.
z
Keep desiccant out of the reach of children.
WARNING (North America)
A projector would become Class IIIb laser product when this lens is used under the
condition that throw ratio is greater than 3.0, and if used without lens hood. If you use
under this condition, you must receive variance approval letter from FDA before usage.
Class IIIb levels of laser radiation are considered to be an acute hazard to the skin and
eyes from direct radiation.
Note
z
The lens hood needs to be mounted to the projector when this lens is used under the
condition that throw ratio is greater than 3.0 in the North America region. Always ask a
qualified technician or your dealer to mount the lens hood.
For the assembly and attachment, refer to the separate document “Mounting the lens hood”.
The components and document of the lens hood may not be supplied depending on the
country or region where you purchased the product.
