background image

5

 

Disposing of the rechargeable battery

DANGER

The rechargeable battery is exclusively for use with 

this shaver. Do not use the battery with other 

products.

Do not charge the battery after it has been removed 

from the product.

 

Do not throw into fire or apply heat.

 

Do not hit, disassemble, modify, or puncture with a 

nail.

 

Do not let the positive and negative terminals of 

the battery get in contact with each other through 

metallic objects.

 

Do not carry or store the battery together with 

metallic jewelry such as necklaces and hairpins.

 

Do not charge, use, or leave the battery where it 

will be exposed to high temperatures, such as 

under direct sunlight or near other sources of heat.

 

Never peel off the tube.

Doing so may cause overheating, ignition, or explosion.

WARNING

After removing the rechargeable battery, do not 

keep it within reach of children and infants.

The battery will harm the body if accidentally swallowed. 
If this happens, consult a physician immediately.

If the battery fluid leaks out, take the following 

procedures. Do not touch the battery with your bare 

hands.

The battery fluid may cause blindness if it comes in 
contact with your eyes. 
Do not rub your eyes. Wash immediately with clean water 
and consult a physician.

The battery fluid may cause inflammation or injury if it comes in 
contact with the skin or clothes. 
Wash it off thoroughly with clean water and consult a physician.

Intended use

 

This WET/DRY shaver can be used for wet shaving using 
shaving lather or for dry shaving. You can use this watertight 
shaver in the shower and clean with water. The following symbol 
means suitable for use in a bath or shower.

 

Notes

 

Treat yourself to wet lather shaves for at least three weeks and 

notice the difference. Your Panasonic WET/DRY shaver requires 

a little time to get used to because your skin and beard need 

about a month to adjust to any new shaving method.

 

Keep both the inner blades inserted. If only one of the inner 

blades is inserted, the shaver may be damaged.

 

If you clean the shaver with water, do not use salt water or hot 

water. Do not soak the shaver in water for a long period of time.

 

Store the shaver in a place with low humidity after use.

 

Do not store the shaver where it will be exposed to direct sunlight 

or other heat sources.

 

Do not bring the system outer foil into contact with hard object. 
Doing so may damage the blades as they are very thin and 
deform easily.

ES-ST29_AUS.indd   5

2015/11/17   19:54:08

Summary of Contents for es-st29

















Reviews: