13
Problem
Action
The shaver cannot be
charged.
Push the main body into the charging
stand all the way and make sure the
charge status lamp glows.
Gently wipe the side terminals
and the charging terminals of the
charging stand with a cloth or
tissue damped with water.
The recommended temperature for
charging is 10 – 35 °C. If charged
at a temperature other than the
recommended temperature, the
shaver may take longer to charge
or may not charge at all.
Operating time is short
even after charging.
Apply oil.
When the number of operations
per charge starts to decrease, the
battery is nearing the end of its life.
Shaver stopped
functioning.
The appliance may not operate in
an ambient temperature
approximately 5 °C or lower.
The battery has reached the end
of its life.
Problem
Action
The shaving sensor
responds even though the
shaver is not in contact
with the skin.
Clean the beard trimmings from
the shaver.
When the shaver is extremely
dirty, remove the foil frame and
wash with water.
(See page 10.)
Replace the system outer foil and/
or inner blades.
Expected life of system outer foil
and inner blades:
System outer foil:
Approximately 1 year
Inner blades:
Approximately 2 years
Makes a loud sound.
Apply oil.
Confirm that the blades are
properly attached.
The shaver can be loud due to the
linear motor. This does not indicate
a problem.
The driving sound
changes while shaving.
This is because the shaving
sensor is operating. The sound of
the shaving sensor changes
depending on the beard thickness.
ES-ST29_AUS.indd 13
2015/11/17 19:54:10
